Home › Oven › Fix

Oven Not Heating? Causes and Fixes (Utah)

Last checked: October 25, 2026

Likely causes

• Burned-out bake or broil element (electric). Look for breaks or blisters on the element.
• Weak or failed igniter (gas). It may glow but not light the burner.
• Tripped breaker or blown fuse (electric)
• Gas supply valve off (gas)
• Failed temperature sensor or thermostat
• Control board or settings issue, such as Sabbath mode or a delay timer

Safe DIY checks

Safety first: unplug the appliance or switch off its breaker before touching anything inside, and shut off the water or gas supply where it applies. If you smell gas, leave the house and call your gas utility from outside.

1. Check that the oven is not set to a timer, delay start or lock mode.
2. On an electric oven, reset the breaker and look at the bake element for visible damage.
3. On a gas oven, make sure the stove top burners light, which confirms gas is on.
4. Watch the gas igniter through the bottom panel. If it glows for a long time with no flame, it is likely weak.
5. Use an oven thermometer to see how far off the temperature is.

When to call a pro

• The element or igniter looks bad, or the checks do not find the issue
• You have a gas oven (leave igniter and gas valve work to a pro)
• You smell gas: leave the house and call your gas utility
• The oven shows an error code or the display is dead

Typical repair cost in Utah

Call for a quote. Costs depend on the brand, the part and the shop, so ask for a written quote after diagnosis. Most Utah shops charge a diagnostic or trip fee, and many credit it toward the repair.

Repair or replace?

Elements, igniters and sensors are usually affordable repairs. Control boards on older ranges can cost enough that replacement is worth comparing. Read the repair or replace guide.

Still stuck? These Utah shops service ovens:

Utah shops that can help

FAQ

Last updated: October 29, 2026